Skip to main content
Updated · Monthly 9 min read

The Importer Question That Invalidated a $3,377 Freight Quote

A windows-and-doors shipment shows why a CFS freight offer had to be replaced when the buyer needed U.S. clearance and delivery to their door.

Ruby Lu
Ruby Lu North America & Oceania Market Specialist
In this guide
  1. 01 Why did the first China-to-Atla…
  2. 02 What should you ask about impor…
  3. 03 How much did the scope change a…
  4. 04 Could the two windows go by air…
  5. 05 How do you request a comparable…

A freight quote to Atlanta is not a door-delivery quote unless it says who will clear the goods through U.S. Customs, pay duties and arrange the final truck. For a buyer shipping two windows and 20 doors from China, the first offer ended at an Atlanta freight station. The decisive question was whether the buyer could act as importer of record; when the answer was no, SINO Shipping withdrew that offer and requoted the shipment as door-to-door DDP sea freight.

Why did the first China-to-Atlanta freight quote not work?

The buyer had received goods from China before, but suppliers had always arranged the shipping. This time, the buyer was coordinating it personally and expected the same result: delivery to an Atlanta address.

The cargo was substantial for a first self-arranged import: two assembled aluminum windows with glass and 20 high-density fiberboard interior doors, manufactured in the Foshan area. The initial shipment details were approximately 1,891 kg and 10.76 cubic metres. Those details supported an LCL sea-freight estimate, but they did not establish who would handle U.S. import formalities.

The first offer was CFS-to-CFS: from a container freight station in China to a container freight station in Atlanta. It covered a defined freight movement and listed origin and destination station charges. It excluded U.S. customs clearance, duties and final delivery. A buyer using that offer would still need to arrange the import entry and get the released cargo from the station to the delivery address.

That distinction matters because “Atlanta” can describe two different endpoints. A freight station in the Atlanta area is where consolidated cargo is unpacked and made available for release. It is not the buyer’s door.

Scope questionInitial CFS-to-CFS offerRevised door-to-door DDP offer
China-side collectionAvailable if requiredIncluded as a quoted pickup charge
Sea shipmentLCL movement to Atlanta freight stationSea shipment of all items together
U.S. clearance and dutiesExcludedIncluded in the quoted service scope
Delivery to Atlanta addressExcludedIncluded, subject to the stated delivery conditions
Buyer’s importer-of-record roleAssumed the buyer could manage import arrangementsQuoted on the basis that the receiver would not act as importer of record

The change was not a discount or a different name for the same service. It was a different allocation of work and responsibility.

What should you ask about importer-of-record status before booking?

Ask: “Who will be the U.S. importer of record for this shipment, and who will arrange the customs entry?” Get the answer before accepting a freight quote or authorising pickup.

The importer of record is the party responsible for the accuracy of the import entry and applicable duties and compliance obligations. A delivery address, a billing entity and an importer of record are not automatically the same thing. Nor does having received supplier-arranged deliveries in the past prove that a buyer is set up to manage an entry independently.

In this case, SINO asked whether the buyer could act as importer of record. The buyer said they could not. That made the original CFS-to-CFS offer unsuitable for the service the buyer actually needed. SINO then requested shipment details and supplier contact information, coordinated the China-side paperwork check, and prepared a revised door-to-door DDP sea quote.

DDP is not a substitute for checking the entry structure. Before booking any DDP shipment into the United States, the forwarder must confirm how the customs entry will be made, which eligible party will be named as importer of record, and what information or authorisations that party must provide. A receiver who does not act as importer of record can still be asked for accurate product, consignee or delivery information.

For windows and doors, that means checking more than weight and volume. The commercial invoice should describe the products and materials accurately; the packing list should reconcile with the physical packages. Classification, origin and any applicable product requirements must be reviewed against the actual goods. “Duties included” is useful only when the quoted scope is based on the right cargo details.

How much did the scope change affect the comparison?

The revised door-to-door quotation was about 36% higher than the initial CFS-to-CFS figure. That percentage is not a general DDP premium. It compares two offers for this specific shipment, issued with different responsibilities and exclusions.

Comparison pointWhat the case showed
Difference between quoted totalsApproximately 36%
Main reason the offers were not comparableThe first stopped at the freight station and excluded clearance, duties and final delivery
Basis of the revised sea quote1,892 kg of quoted chargeable weight, subject to final warehouse measurement
Delivery limitationTailgate-truck service was not included
Rate validityThe quoted rate was valid for its stated week and required rechecking before shipment

The initial enquiry listed 1,891 kg; the revised calculation used 1,892 kg. That small difference was not the central issue. The central issue was that the first total omitted services the buyer expected someone else to perform.

A proper comparison should also identify charges that may change after quoting. LCL cargo is measured at the receiving warehouse. Oversize handling depends on the confirmed packages. Customs inspections can create additional costs and delays. Delivery conditions matter for large glazed windows and doors: confirm whether the destination can receive the vehicle offered, and arrange unloading separately if the quote does not include the equipment or labour needed.

Compare like with like: the same cargo, measured dimensions, delivery point, entry responsibilities and exclusions. A lower station-to-station figure is not a saving if the buyer still has to purchase the missing services.

Could the two windows go by air while the doors went by sea?

Possibly, but that would require a separate air-freight quotation and shipment plan. The buyer asked whether flying only the two windows would get them sooner without an excessive extra cost. The revised quote, however, covered all two windows and 20 doors together by sea. It was not an air-and-sea split, and it was not an all-air quote.

This clarification is important with assembled glazed products. An air option must be costed against each window’s packed dimensions, gross and volumetric weight, protective packaging, handling requirements, air service and destination delivery. Splitting the order also creates two sets of shipment coordination and potentially separate import entries or delivery arrangements.

OptionWhen to consider itWhat to verify before accepting
All items by seaThe full order can arrive together and cost control takes priorityPackage dimensions, LCL handling, clearance scope and delivery equipment
Windows by air; doors by seaThe windows have a genuine earlier installation deadlineSeparate air quote, packaging, chargeable weight and import plan for each shipment
All items by airThe entire order has a time-critical requirementFeasibility and total landed cost for the full cargo

The sea quote gave an estimated 45–58 days after vessel departure. That was not a promise of delivery 45–58 days after payment. Before departure, pickup and export processing still had to take place. SINO indicated that pickup would typically take around three to four days, with about two further days for export customs handling, once the shipment was ready and arrangements could proceed. Those estimates remained subject to supplier release, documents, vessel scheduling and checks.

In the correspondence, supplier-release status needed further coordination, and a truck later arrived at the factory. The record does not establish a final sailing date or completed delivery. That is why a useful schedule distinguishes cargo readiness, collection, departure, arrival, clearance and final delivery rather than compressing them into one “transit time.”

How do you request a comparable door-to-door quote from China?

Start with the result you need, not just the port or airport you want cargo sent to. For this case, the workable instruction was: collect the packed windows and doors from the Foshan-area supplier, ship them by sea, arrange the agreed U.S. import handling, and deliver them to the Atlanta address.

Send a forwarder:

  • Product and packing details: item descriptions, materials, quantities, gross weights, dimensions and package count.
  • Supplier details: collection location, contact route, cargo-ready status and export-document status.
  • Destination requirements: full delivery address, site access, unloading capability and any appointment rules.
  • Import details: whether you can act as importer of record, plus the documentation available for classification and entry.
  • Timing priorities: whether the complete order must travel together or specific items justify a separately quoted air shipment.

Then ask for the quote to state its endpoint, customs-entry arrangement, duty treatment, delivery conditions, chargeable-weight basis, exclusions and validity date. Do not infer these from “to Atlanta” or “DDP” alone.

SINO Shipping has operated since 1989, has eight offices in China, and holds NVOCC and Class A licences. In this shipment, the useful capability was practical coordination: checking the supplier and export documents in China while revising the U.S. destination scope before the buyer committed to an unsuitable booking.

Already assembled aluminum windows with glass installed and high-density fiberboard interior doors
ReferenceGlossary· 17 terms

Search a term, or jump by letter.

CFS
Container Freight Station. Facility where LCL cargo is consolidated (origin) or deconsolidated (destination). Under FCA (CFS), the seller delivers loose cargo here; hand-off and risk transfer at receipt.
clearance
Customs clearance. Process of presenting goods and documents to customs and obtaining release for import or export. Export clearance (who files it) is the key difference between EXW and FOB.
Commercial Invoice
Document stating value, description, and terms of the goods; required for customs and payment.
consignee
The party receiving the goods at destination. Named on the B/L and delivery documents.
DDP
Delivered Duty Paid. Seller pays all costs to the buyer's door, including clearance, duties, and Consumption Tax. True DDP means the recipient pays nothing at delivery.
door-to-door
Service from shipper's door to consignee's door. The forwarder or carrier coordinates all legs, including pickup and delivery.
duty
Import duty. Tax levied by customs on imported goods, based on HS code, value, and origin.
exclusions
Clauses that explicitly exclude certain causes of loss from insurance coverage (e.g. insufficient packing, inherent vice, delay, humidity). Check the certificate before you accept CIF or CIP.
forwarder
Freight forwarder. Company that books transport, arranges documentation, and often coordinates customs on your behalf.
Importer of Record
The entity in the destination country legally responsible for the import declaration and for paying duties and taxes (abbrev. IOR).
landed cost
Total cost to get goods to the final destination: transport, handling, customs, duties, taxes, and last-mile. Use it to compare modes, not headline rate alone.
LCL
Less than Container Load. Your cargo shares a container with others; priced per CBM (plus CFS and handling at both ends).
Packing List
Document listing contents, weights, and packaging of each package; used for customs and cargo handling.
pickup
Factory collection. Truck books, loads at origin, and transports cargo to the CFS, CY, or airport. Distance, multi-supplier stops, and cargo readiness affect cost.
REACH
Registration, Evaluation, Authorisation and Restriction of Chemicals (EC 1907/2006). EU regulation controlling chemicals in products imported into Portugal.
service scope
The range of logistics services included in a quote. P2P = main carriage only; D2D = pickup, freight, and delivery. Always clarify scope and Incoterm (DAP vs DDP) before booking.
volumetric weight
Billable weight used by air and express when cargo is light but bulky. (Volume in cm³ ÷ divisor.) Can be 2–3× actual weight; check how your carrier calculates it.